"Where Technology & Innovation Meet" 

Facebook Twitter YouTube E-mail

MIDCO MD III ATF #2008

Automatic Transmission Fluid

Updated Formula

 PRODUCT DESCRIPTION

Midco MD III ATF incorporates the most advanced additive technology available today to provide unsurpassed performance in automatic transmissions.  It provides excellent anti-wear protection for maximum transmission life. The multi-functional Midco technology can be used in a wide range of commercial vehicles and passenger cars. Mixed fleet operators are able to use one fluid to meet multiple transmission requirements and power steering. Specific applications include GM Dexron® III-H, Ford Mercon®, Allison C-4 and Allison TES-389.

 

TYPICAL SPECIFICATIONS   Viscosities:       @ -40°C, cP…………………………………………………………….17,000       @100°C, cSt……………………………………………………………….7.27       @  40°C, cSt……………………………………………………………..35.83       @100°F, (SUS)…………………………………………………………….179    Viscosity Index………………………………………………………………….173  Flash Point, COC, °F, (°C)………………………………………….393 (200)  Vickers Wear, mg………………………………………………………<1.2  Copper Strip………………………………………………………………1B  TES-389 Elastomer……………………………………………………Pass  GM Elastomer Test Sequence……………………………………….Pass  Mercon Seals Sequence………………………………………………Pass  Color, Observed………………………………………………………Red Liquid

FEATURES

• Meets the requirements of modern ATF designs with a broad range application for reduced inventory and lubricant misapplication.

• Contains special Midco exclusive “friction modifiers”.

• Resists leakage.

• Formulated with enhanced oxidation and thermal stability to prevent deposit formation and acidic by-products

• Extended clutch plate life.

• Proven field performance with extended drain intervals.

• This wide temperature range improved low temperature flow.  The high viscosity index assures that the oil will not thin too much at elevated operating temperatures.

 

 

SHIPPING-AVAILABILITY Midco MD III ATF (product code #2008) is available in the following sizes: case of 12 quarts, 3-1gallon case, 5 gallon pails,15 gallon drums,30 gallon drums, 55 gallon drums, 275 gallon totes, 330 gallon totes and bulk quantities.

SAFETY – DISPOSAL

Emergency and First Aid Procedures

Eye Contact – If splashed into the eyes, flush with clean water for 15 minutes or until irritation subsides. If irritation persists, call a physician.

Skin Contact – In case of contact, remove any contaminated clothing and wash the skin thoroughly with mild soap and water. If irritation persists, call a physician.  Inhalation –   Remove to fresh air. Call a physician immediately.

Ingestion – If ingested, call a physician immediately.  Further information regarding health and safety is available upon request.  .  All products used in Midco Additives have been registered with the federal government and have assigned CAS numbers.  Dispose of in accordance with local authority requirements.  Protective eye wear and chemical resistant gloves are recommended when handling Additive Al concentrate.  Dispose of in accordance with local authority requirements.  Contact authorities if accidentally discharged into natural waterways or sanitary sewers.

 

 

 

 

 

 

 

 

 

 

 

Be Sociable, Share!

Leave a Reply

Your email address will not be published. Required fields are marked *


− 3 = 3

Home MIDCO LUBRICANTS MIDCO MD III ATF #2008